Polysil industrial
Silica based coating for metal surfaces with innovative protection properties. It characterized by ease of cleaning and high surface hardness
Polysil is the coating based on silicon atomic with revolutionary features that allows the protection of the substrate reconditioning the surface structure.
With a layer of a few microns high surface hardness (6H), surfaces also have a high abrasion resistance and are then restarted and protected from major assaults to which they are subjected in the industrial.
-
Areas of use: GFK, Plastics, polymers, paints, metals, VTR, Composites, gelcoat.
-
Based on: Polimeri silicei a base solvente.
-
Color: Colorless, transparent.
-
Quantity Available: Packs 0,5 Litre, 1 Liter, sealed containers 5 l .
-
Storage / product life: Keep the product away from direct sunlight. Not open, in the original container and at a temperature of 5 ° C a 35 ° C (41 ° F a 95 ° F), storage is possible for at least 6 months. In pack 5 Liter sealed conservation possible until 24 months. Protect from moisture, gelo o temperature superiori a 35 ° C. Check for signs of deterioration if the retention period has been exceeded recommended. Seal tightly after opening. Storage areas should be well ventilated.
-
Preparation: The product can be applied directly from the container. Refer to the separate instructions for the preparation of the surface.
-
Application: Splash, electrostatic spray or manually with fleece. See special instructions. Do not apply to the direct sunlight.
-
Operating Temperature: At room temperature and the lower surface at 25 ° C.
-
Drying times: At room temperature of 20 ° / 25 ° C dry to the touch in 40 minutes, dry after 24 hours, after full cure 7 days.
-
Coverage: It varies depending on the type of application, to about 5μm thick uniform coating with manual application of the cover is 70 m / L ± 10%.
-
Certifications: Bending up to 90 ° (ISO 6860) no loss of adhesion, Surface hardness (ISO 15184) Metodo pencil pen 6H, adhesion test ASTM D 3359-78 met B (cross hatch) 5B, 0% on chrome-plated aluminum and composite. FROM 54837:2007 Determination of the burning behavior using a gas burner for railway sector (test materials, small components and sections of components for rail vehicles – Determination of the burning behavior using a gas burner. Result: Classe S5 (0 flame development) Smoke development class SR2 (0 smoke development) Dripping test class ST2 (inert to gocciolio). Flammability test NF P 92-501 Result: M1 Not flammable. Conforme RAL – (GZ 632) – Quality Certification GRM German(Quality certification for cleaning metal facades), the product can be used on metal facades.
-
Safety Tips: Please refer to the instructions for the health and safety provided and ensure compliance with the safety standards in the industry. For more information see the safety data sheet.
-
Disposal: Dispose of as industrial waste in accordance with local and regional.
-
Note: The product is resistant to many chemical agents, They were carried out extensive testing on aggredibilità from major products including aggressive acids and alkalis, including lycopene. Require additional technical documentation to ensure their suitability for use for which you want to use the product.
CERTIFICATION ON REQUEST.
Metal Seal 218
Anti Fingerprint for Metals 218. Coating anti lasting imprint
The coating allows to obtain surfaces matte metal with lasting protection against fingerprints and dirty marks. It improves the surface smoothness, so you get surfaces easier to clean that remain clean longer. The durable bond with the surface ensures high mechanical and chemical resistance. Polimerizza a temperatura ambiente.
-
Areas of use: Matt and brushed metal surfaces: stainless steel, chrome, aluminum, brass, copper etc.
-
Based on: Polymer matrix, a base solvente.
-
Color: Colorless, transparent.
-
PH value: > 7, alkaline.
-
Quantity Available: PE bottle 1L (0.8 kg), PE tank 5L (3.6 kg), PE tank 20 (16 kg), Bin PE 200L(168 kg).
-
Storage Product: Not open, in the original container and at a temperature of 5 ° C a 35 ° C (41 ° F a 95 ° F), storage is possible for at least 6 months. Protect from moisture, gelo o temperature superiori a 35 ° C. Check for signs of deterioration if the retention period has been exceeded recommended. Seal tightly after opening. Storage areas should be ventilated.
-
Preparation: No preparation is required, It can be applied directly from the container.
-
Application: See special instructions.
-
Operating Temperature: Ambient temperature and the area between 5 ° C e 35 ° C (41 ° F-95 ° F). Curing at room temperature within 24 ore a 160 ° C (320 ° F) 1 Now. Changes in external conditions can influence the hardening time.
-
Coverage: About 15g per square meter (applying roller or cloth), kitten 25 g per sqm applying brush.
-
Safety Tips: Please refer to the instructions for the health and safety on the package and ensure compliance with the safety standards in the industry. For more information see the safety data sheet.
-
Cleaning equipment: With alcohol or in a bath of potassium hydroxide.
-
Retouching and restoration: Remove with standard paint remover or by sanding.
-
Cleaning surfaces: Once cured, surfaces can be cleaned with mild detergent from home.
-
Disposal: The disposal of residual material in accordance with the legislation on the disposal of paints and solvents.
Metal Seal 220
Protective Metals 220. Corrosion protection for light metals heat resistant. Polimerizza a temperatura ambiente.
The coating forms a layer of mechanically resistant light metals. It gives a matte finish with excellent adhesion and abrasion resistance. And 'resistant to extreme heat (until 450 ° C / 842 ° F) and corrosive substances such as acids or alkaline condensates.
-
Areas of use: Corrosion protection of light metals.
-
Base material: Inorganic-organic 2k- sitema hybrid, Solvent based.
-
Color: Once dry beige opaque.
-
pH: <, slightly acid.
-
Quantity Available: PE tank 5L (5 Kg), additional containers on request,
-
Storage: Not open, in the original container and at a temperature of 5 ° C a 20 ° C (41 ° F a 68 ° F), storage is possible for at least 6 months. Protect from frost and temperatures above 20 ° C. Check for signs of deterioration if the retention period has been exceeded recommended. Seal tightly after opening. Storage areas should be ventilated.
-
Preparation: Combine the components by mixing or shaking in relationship 30:1 componente A: componente B. For more information, refer to the information included.
-
Application: A spray or immersion. For details, see the instructions included. Air temperature range 5 ° C-35 ° C (41 ° F-95 ° F). Changes in external conditions can influence the hardening time. Complete drying in 24 hours. Full resistance to chemical agents in a week.
-
Coverage: The coverage varies according to the structure of the surface and the type of application.
-
Safety Tips: Please refer to the instructions and advice on health and prudence on the package and ensure compliance with the standards of safety and health of the enterprise sector. For more information see the safety data sheet.
-
Cleaning tools: Wipe with a clean thin.
-
Disposal: Dispose of inventories of materials in accordance with the relevant legislation for the disposal of paints and solvents.
