Polysil industrial
Silica based coating for metal surfaces with innovative protection properties. It characterized by ease of cleaning and high surface hardness
Polysil is the coating based on silicon atomic with revolutionary features that allows the protection of the substrate reconditioning the surface structure.
With a layer of a few microns high surface hardness (6H), surfaces also have a high abrasion resistance and are then restarted and protected from major assaults to which they are subjected in the industrial.
-
Areas of use: GFK, Plastics, polymers, paints, metals, VTR, Composites, gelcoat.
-
Based on: Polimeri silicei a base solvente.
-
Color: Colorless, transparent.
-
Quantity Available: Packs 0,5 Litre, 1 Liter, sealed containers 5 l .
-
Storage / product life: Keep the product away from direct sunlight. Not open, in the original container and at a temperature of 5 ° C a 35 ° C (41 ° F a 95 ° F), storage is possible for at least 6 months. In pack 5 Liter sealed conservation possible until 24 months. Protect from moisture, gelo o temperature superiori a 35 ° C. Check for signs of deterioration if the retention period has been exceeded recommended. Seal tightly after opening. Storage areas should be well ventilated.
-
Preparation: The product can be applied directly from the container. Refer to the separate instructions for the preparation of the surface.
-
Application: Splash, electrostatic spray or manually with fleece. See special instructions. Do not apply to the direct sunlight.
-
Operating Temperature: At room temperature and the lower surface at 25 ° C.
-
Drying times: At room temperature of 20 ° / 25 ° C dry to the touch in 40 minutes, dry after 24 hours, after full cure 7 days.
-
Coverage: It varies depending on the type of application, to about 5μm thick uniform coating with manual application of the cover is 70 m / L ± 10%.
-
Certifications: Bending up to 90 ° (ISO 6860) no loss of adhesion, Surface hardness (ISO 15184) Metodo pencil pen 6H, adhesion test ASTM D 3359-78 met B (cross hatch) 5B, 0% on chrome-plated aluminum and composite. FROM 54837:2007 Determination of the burning behavior using a gas burner for railway sector (test materials, small components and sections of components for rail vehicles – Determination of the burning behavior using a gas burner. Result: Classe S5 (0 flame development) Smoke development class SR2 (0 smoke development) Dripping test class ST2 (inert to gocciolio). Flammability test NF P 92-501 Result: M1 Not flammable. Conforme RAL – (GZ 632) – Quality Certification GRM German(Quality certification for cleaning metal facades), the product can be used on metal facades.
-
Safety Tips: Please refer to the instructions for the health and safety provided and ensure compliance with the safety standards in the industry. For more information see the safety data sheet.
-
Disposal: Dispose of as industrial waste in accordance with local and regional.
-
Note: The product is resistant to many chemical agents, They were carried out extensive testing on aggredibilità from major products including aggressive acids and alkalis, including lycopene. Require additional technical documentation to ensure their suitability for use for which you want to use the product.
CERTIFICATION ON REQUEST.
