Polysil Antigraffiti
Rivestimento antigraffiti a base silicea
The coating Polysil Antigraffiti is easy to use and ready to use; It can be used against graffiti, tar road, tree sap, unto, grasso, spots and similar. Dries at room temperature in about one hour from the application. It can be easily applied with a cloth or brush. The resistance to the attack of most of the graffiti (indelible markers etc.) You are obtained after 48 hours from, while complete protection against all types of graffiti is obtained after seven days after application of the product itself. The removal of graffiti on the surface treated with anti-graffiti Polysil is effected by the use of appropriate washing products (a very low environmental impact) or pressure washing. In addition to the features described above it has excellent resistance to weathering and UV exposure, high surface hardness and abrasion resistance, as well as oxidation and corrosion.
-
Areas of use: Anti-graffiti coating for bus, trains, public transport, road signs, facades of buildings non-absorbent, no limitations.
- Based on: Polimeri silicei a base solvente.
- Physical characteristics of the coating: • Color: Clear, • colorless % solid resin : 26° C • Density state Liquid: 0.950 g / ml • Recommended thickness of the film: 15 microns asciutto.
- Coating properties: • Hardness: >6H (ASTM D3363) • Adhesion on aluminum chromate: 90 – 100 % (ASTM D3359) on chromed aluminum • Gloss: 90 @ 60 degrees • Chemical Resistance: MEK, Acetone, Brake fluid, and higher organic solvents • UV Stability: Excellent.
- Quantity Available: Packs 0,5 Litre, 1 Liter, 5 l, 10 Litre.
- Storage / product life: Keep the product away from direct sunlight. Not open, in the original container and at a temperature of 5 ° C a 35 ° C (41 ° F a 95 ° F), storage is possible for at least 2 years. The shelf life is determined by the precautions taken in keeping the duly sealed containers and protected from mixtures. Seal tightly after opening. Storage areas should be ventilated.
- Drying times: Polysil Antigraffiti just evaporates the solvent and is dry to the touch dryer at room temperature in less than 1 Now. The complete efficiency of the product can be obtained after 7 days of drying at room temperature.
- Application: Splash, electrostatic spray or manual with cloth or brush. Do not apply to the direct sunlight. Working at room temperature and the lower surface at 25 ° C.
- solvents: It can be diluted with non-polar solvents such as alkanes, aromatic hydrocarbons, ether, ketones and esters. It became sensitive to moisture and generates ammonia slowly in contact with it. The polymer also react with polar substances such as acids, bases and alcohol.
- Certifications: Bending up to 90 ° (ISO 6860) no loss of adhesion, Surface hardness (ISO 15184) Metodo pencil pen 6H, adhesion test ASTM D 3359-78 met B (cross hatch) 5B, 0% on chrome-plated aluminum and composite. FROM 54837:2007 Determination of the burning behavior using a gas burner for railway sector (test materials, small components and sections of components for rail vehicles – Determination of the burning behavior using a gas burner. Result: Classe S5 (0 flame development) Smoke development class SR2 (0 smoke development) Dripping test class ST2 (inert to gocciolio). Flammability test NF P 92-501 Result: M1 Not flammable. Conforme RAL – (GZ 632) – Quality Certification GRM German(Quality certification for cleaning metal facades), the product can be used on metal facades.
- Safety Tips: Please refer to the instructions for the health and safety provided and ensure compliance with the safety standards in the industry. For more information see the safety data sheet.
- Disposal: Dispose according to local and regional regulations for paints and solvents.
- Results of exposure tests to the weather: after about 3000 hours of xenon exposure to the test (FROM 11341) no chalking or aging when using Polysil Antigraffiti, rather it retains its color and its original brilliance.
