Screen Coat® – Hotellerie
Easy to clean glass surfaces for glass shower enclosures: manual application
Screen Coat ® is the coating material for transparent glass-based solvent. Screen Coat produces a water-repellent surface that also serves as a barrier limescale. Screen Coat thus protects the glass surfaces that are regularly exposed to water from limestone deposits very durable and not more eliminable, thus retaining the brilliance and the value of the glass.
-
Largest single use: Glass surfaces of the shower enclosure. In principle we do not recommend use of outside water-repellent systems (windows, winter gardens, canopies).
-
Based material: Anti-adhesion components containing fluorine in an alcoholic solvent. Color: Colorless.
-
PH value: 2 -3 (10% in the water).
-
Quantity Available: Bidoncino in PE da 5L | Bidoncino in PE da 20L | Stem PE 200L | Industrial container IBC 1000 L
-
Storage: At temperatures between 5 ° C and 40 ° C in original sealed packaging at least 12months. Keep away from frost and temperatures above. Upon successful completion of the shelf life of the material must be re-examined. Reseal packaging already open. Provide adequate ventilation in rooms where the product is stored.
-
Preparation: Preparation not required, the material can be applied directly from the package.
-
Application: Manual application by means of a cloth or a polishing machine according to the instruction manuals. Curing without any application of heat.
-
Working temperature: Air temperature and the object between 5 ° C and 35 ° C. The low or high temperatures can make it difficult to work.
-
Consumption: ca. 8 – 15 g/m2 (according to the procedure of application).
-
Protection measures: During use observe the instructions and safety advice on packaging as well as the accident prevention regulations of the relevant insurance association. For more detailed information refer to the safety data sheet.
-
Cleaning the instrument: If you need to clean the work tools with 2-propanol or with alcohol.
-
Tweaks and new coating: The surfaces that had already been finished with anti-adhesion coatings Nanoprom can be processed as untreated surfaces. The residues of a previous layer should not be deleted.
-
Cleaning of surfaces: Wipe with a damp cloth or microfiber cotton, evtl. with a commercial window cleaner. Acid detergents limescale are preferable to alkaline detergents or disinfectants. Do not use abrasive or vaporizer.
-
Disposal: Recycle only completely emptied packaging. The dried residue can be disposed of as household waste.
-
SCRUB TEST SCREEN COAT COMPARED TO OTHER TYPES OF PRODUCTS
