Glass Solar Plus
PV Impanti easy to clean and with continuity of return: manual application
Solar Glass Plus is the coating material for transparent glass-based solvent. Glass Solar Plus produces a water and oil repellent surface which also acts as anti barrier. Glass Solar Plus therefore protects the solar thermal and photovoltaic panels that are regularly exposed to water for a long resistant limestone deposits, thus retaining the efficiency of the panel.
-
Largest single use: Photovoltaic Solar Panels / Heat.
-
Based material Anti-adhesion components containing fluorine in an alcoholic solvent.
-
Color: Colorless.
-
PH value: 2 -3 (10% in the water).
-
Quantity Available: Bidoncino in PE da 5L | Bidoncino in PE da 20L | Stem PE 200L | Industrial container IBC 1000 L
-
Storage: At temperatures between 5 ° C and 40 ° C in original sealed packaging at least 12months. Keep away from frost and temperatures above. Upon successful completion of the shelf life of the material must be re-examined. Reseal packaging already open. Provide adequate ventilation in rooms where the product is stored.
-
Preparation: Preparation not required, the material can be applied directly from the package.
-
Application: manual application by means of a cloth or a polishing machine (by. figure) according to operating instructions. Curing without any application of heat.
-
Working temperature: Air temperature and the object between 5 ° C and 35 ° C. The low or high temperatures can make it difficult to work.
-
Consumption: ca. 8 – 15 g/m2 (according to the procedure of application).
-
Protection measures: During use observe the instructions and safety advice on packaging as well as the accident prevention regulations of the relevant insurance association. For more detailed information refer to the safety data sheet.
-
Cleaning the instrument: If you need to clean the work tools with 2-propanol or with alcohol.
-
Tweaks and new coating: The surfaces that had already been finished with anti-adhesion coatings Nanoprom can be processed as untreated surfaces. The residues of a previous layer should not be deleted.
-
Cleaning of surfaces: Wipe with a damp cloth or microfiber cotton, evtl. with a commercial window cleaner. Acid detergents limescale are preferable to alkaline detergents or disinfectants. Do not use abrasive or vaporizer.
-
Disposal: Recycle only completely emptied packaging. The dried residue can be disposed of as household waste.
